Automatic Water Meter Testing Table Used for Water Meters

Automatic Water Meter Testing Table Used for Water Meters

This device is used for the verification of ordinary water meters, smart water meters, ultrasonic water meters, and electromagnetic water meters.
Send Inquiry
Description

automatic water meter test bench (5)

Supports All Water Meter Technologies
Including mechanical, ultrasonic, or electromagnetic.
• Water meter size: DN 15 - DN 25;
• Measuring range:
min. Flow rate 1 liter/hour;
max. Flow 1600 m³/h;
Fully Automatic or Semi-automatic Test Bench
Auto Mode: Data auto-collected by input (pulse or frequency) from an optical sensor, or with a camera digital conversion.
Semi-automatic mode: the reading is manual entry via keyboard/keypad into the computer.
Water as the Test Medium
• Water temperature range: 5 - 95 °C.
• Water source: through the closed circuit system of the tank or connection to the external water supply.

Testing Method
Weighing/static weighing, main instrument method, volume using a reference container
• Flight start and stop pulses and time compensation or
• Standing starts and stops

Additional Testing Possible
Depends on the capacity of the meter In the test, the following additional checks are.
It is possible: Pulse input, frequency input, manual reading, optical sensors, and process cameras.
Analog current or voltage output.
Supports a Variety of Test Programs
Standard tests that support 3 flow rates, and extended tests, eg 14 traffic or more. This flow is automatically regulated by a pump with a variable speed controller, regulating valve, bypass valves, and precise frequency controllers

Flexibility
Water meters can be tested in a variety of situations pressure or temperature conditions completely automatically.

1water meter test bench picture

5

Basic Information
1. Device flow range: (20-8000)L/h;
2. Uncertainty of the device: ≤0.2% (k=2)
3. Pressure range: 0-1.6MPa;
4. Ambient temperature: 15-25℃;
5. Relative humidity: (45% -75%);
6. Atmospheric pressure: (86-106)kpa;
7. Power supply voltage: 400V±5%, 50HZ;
8. Air pressure: (3.5-6)bar;
9. Equipment power: water pump 11KW, Piston 3KW, heating 12KW;
10. Equipment size: length, width, and height (5800 mm *1500 mm *2500mm)

 

company Profile

S.H.Meters. Profile (3)

 

S.H.Meters. Profile (9)

Hot Tags: Automatic Water Meter Testing Table Used for Water Meters, suppliers, manufacturers, factory, wholesale, buy, price, bulk, for sale, Automatic Water Meter Testing Table, water meter piston test bench, Test Bench for Piston Water Meter, Water Meter Calibration System, Water Meter Calibration, Automatic Water Meter Testing Bench