With the gradual increase in the application of ultrasonic water meters, it is not only used for domestic water metering but also widely used in agricultural and industrial water metering, so why choose ultrasonic water meters?
1. Why choose ultrasonic water meters for agricultural water measurement?
From ancient times to the present, the phenomenon of fighting caused by "agricultural water competition" has occurred from time to time. Traditional ground irrigation methods, such as border irrigation, furrow irrigation, submerged irrigation, and flood irrigation, are used. These irrigation methods often consume large amounts of water and have low utilization rates. This is a very unreasonable way of agricultural irrigation. With the emergence of modern pumped well irrigation methods, this phenomenon rarely occurs.
Relatively speaking, mobile well irrigation is a more advanced agricultural irrigation method, which cannot do without the support of ultrasonic water meters. On the one hand, the installation environment of water meters for agricultural water is relatively harsh. Ultrasonic water meters have an IP68 waterproof rating, which can greatly reduce the frequency of water meter failures; on the other hand, ultrasonic water meters have extremely small pressure loss, higher range ratio, and more equitable distribution of water resources. . In addition, ultrasonic water meters are hardly affected by factors such as fluid composition and viscosity, and have a longer service life.
The advantages of using ultrasonic water meters for agricultural water metering are: since there are no mechanical transmission parts and no blocking elements, the measurement of ultrasonic water meters is almost not affected by water quality and can adapt to the conditions of poor agricultural irrigation water quality (including impurities such as sediment and aquatic plants). Measure the most suitable product; each water meter has a quantitative control function (5 quantitative controllers), and according to production needs, up to 5 irrigation timings can be set every day; it can also be connected to the host computer and centralized by computer Manage timing and quantitative management of irrigation.
2. Why choose ultrasonic water meters for industrial water metering?
The advantages of choosing an ultrasonic water meter for industrial water metering are: it can be used for fire-fighting pipelines; the measurement and process control of production water (with many communication interfaces); it is helpful for the independent accounting of water use by various departments in the factory; the two-wire system 4 ~ 20mA is convenient for connection into industrial systems.
Note: When introducing an ultrasonic water meter to an industrial customer, it can be defined as an industrial water meter. The two-wire system 4-20mA is convenient for access to the industrial system, powered by batteries, and can be converted according to the verification method of the flow meter and the parameter settings different from the water meter. For use with two-wire ultrasonic flowmeters.