What Are The Daily Maintenance Measures For Ultrasonic Water Meters?

Compared with ordinary mechanical water meters, ultrasonic water meters are basically maintenance-free products, but sometimes some maintenance is still required for ultrasonic water meters, so what are the main maintenance measures? Regarding the daily maintenance measures of ultrasonic water meters, as a manufacturer, we have the following suggestions, hoping to help you better use and maintain ultrasonic water meters.
1. When using an ultrasonic water meter, try to ensure that it can operate normally. The placement position is horizontal or vertical, and do not place it obliquely.
2. Do not open the lead seal of the ultrasonic water meter without permission. The unauthorized operation may cause permanent damage to the ultrasonic water meter, which will bring unnecessary losses to the user.
3. It is also not allowed to place things on the top of the ultrasonic water meter, because the long-term placement of things will cause the electronic part of the ultrasonic water meter to be under pressure for a long time, which will have a certain impact on the measurement accuracy.
4. The ultrasonic water meter is an instrument, which must be handled with care during transportation and use because the ultrasonic water meter must not only ensure its normal use but also ensure that it can accurately measure and transmit data.
5. After the ultrasonic water meter has been used for a period of time, some dust will be generated on the transducer, which may cause errors in signal transmission and cause measurement errors. Therefore, regular cleaning of the transducer of the ultrasonic water meter is a necessary maintenance step for maintaining the ultrasonic water meter.
6. When in use, care should be taken to ensure that the surroundings of the ultrasonic water meter are clean, to avoid corrosion of the ultrasonic water meter by some acidic and alkaline substances, and to ensure moisture-proof during the period, these will cause damage to the ultrasonic water meter and cause errors.