The powered piston is made of stainless steel and includes high-quality water-tight joints which guarantee more than 500,000 cycles under normal working conditions. The piston is also equipped with a leakage detection sensor and a high-standard mobile bearing mounted on the piston rod.
Stainless steel water tanks are used to store water ready for use and also to collect it after it has passed through the meters. They both contain a filter to protect the piston.
Meters are equipped with reflective disks so that the volume of water can be measured using optical scanning heads. The angle seat globe valves are manufactured from stainless steel or bronze and are pneumatically operated.
This set of equipment is made of all stainless steel and copper processing, with a beautiful appearance, and the maintenance of each main component is simple and convenient.
Installation and Adjustment
1. The calibration device should be installed in a well-lit and well-ventilated place.
2. Install the standard gauge rack on the base and adjust the vial. The workbench is installed directly in front of the standard measuring instrument, the meter outlet pipe is aligned with the corresponding measuring instrument, and then the measuring instrument frame and the workbench are fixed.
3. Connect the water inlet pipe and the copper pipe of the two-position four-way valve. There should be no leakage at each joint.
4. If the rotor meter is skewed after transportation, adjust it and install it vertically.
5. For ease of use and maintenance, sufficient space should be left around the calibration device during installation.
Hot Tags: Double Series Mechanical Water Meter Test Bench, suppliers, manufacturers, factory, wholesale, buy, price, bulk, for sale, piston type water meter test bench, water meter piston test bench, Fully Automatic Water Meter Test Bench, Water Flow Meter Test Bench, water meter test bench calibration, single jet test bench