Name: Ultrasonic Flow Metering
Brand: S.H.Meters
SKU: 206466051

Ultrasonic Flow Metering

· Size: DN50.DN80.DN100.DN150.DN200.DN250.DN300
· Range: R250.R400
· Technical data comply with international standard ISO 4064.
· Measuring principle: Ultrasonic time difference principle, low-voltage multi-pulse transmitting circuit, double-balanced noise suppression receiving circuit.
· Measuring medium: water
· Pipe diameter range: DN50-DN400 different pipe diameters are optional
· Pipe length: designed according to the size of ordinary water meters
· Measurement period: 3 seconds by default, user can choose from 1 to 31 seconds.
· Applicable temperature: ambient temperature 5℃～55℃
· Protection level: IP68
· Interface output: RS485 standard configuration, GPRS, LoRa optional.
· Power supply mode: a single 3.6V lithium battery can work for 8-10 years

Send Inquiry

Description

SIMPLE INTRODUCTION

It is a metering instrument to continuously measure, record, and display the volume of water flowing through the sensor by use of the ultrasonic time difference method. Ultrasonic Water Meter has two main display interfaces:

Press and hold the key in the awake state to enter the mode selection interface (P1, P2, P3, P4).

It enters into sleeping mode without any operations in 30 minutes, with no indication Ultrasonic valve-controlled water meter is a new type of intelligent fully electronic valve-controlled water meter using ultrasonic detection technology. The calculator realizes accurate flow measurement by processing the temperature difference collected by the sensor and the time difference of the sound wave passing through the fluid. It integrates measurement, integration, display, valve control, and wireless communication. It adopts micro power consumption technology and the battery can be used for more than 8 years. , At the same time, the instrument has the characteristics of small size, good stability, and strong anti-interference ability.

Ultrasonic Water Flow Metering

Ultrasonic Water Flow Metering more choice

Ultrasonic Water Flow Metering Parameter

Nominal Diameter	Length L	Width B	Hight H	Flange Connection
mm				Flange Diameter	Bolt Circle Diameter	Bolt Size-M
DN50	200	170	215	170	125	4-M16
DN65	200	185	220	185	145	4-M16
DN80	225	200	235	200	160	8-M16
DN100	250	220	255	220	180	8-M16
DN125	250	250	285	250	210	8-M16
DN150	300	285	335	285	240	8-M20
DN200	350	340	405	340	295	12-M20
DN250	450	405	470	405	355	12-M24
DN300	500	460	525	460	410	12-M24